China manufacturer 720L/Min Gasoline/Electric PLC Control System High Pressure Air Compressor Use for Scuba Diving and Firefighting wholesaler

Merchandise Description

Our company is a skilled high-force gasoline compressor answer service provider, which can meet the needs of various customers. As for the higher-finish demand in the subject of medium and large-pressure compressors, and can gives end users with tailored merchandise and higher-good quality solutions.
 

doing work theory

This solution is mass-developed soon after layout changes and optimization in accordance with the German model. The ultimate piston adopts a unique approach, and the piston ring adopts the Japanese Riken process. Unanimous praise from users. This merchandise adopts 4-cylinder four-phase compression, oil pump lubrication, inter-phase protection valve and deep filtration technique. HC-X720 can supply safe compressed air for any industry that calls for higher-stress pure air source, and provide protected compressed air that satisfies the specifications of human breathing. This solution is developed, developed and examined and approved in accordance with the needs of GB/T 12929-2008 “Marine High Force Piston Air Compressor” the air quality meets the EN12571 international breathing compressor respiratory standard HC-X720 is a sort of air compression products, which will be free of charge 1 kg (1bar/.1Mpa) of air in the condition is compressed to a substantial-stress fuel of 330 kg (330bar/33Mpa) gauge strain action by stage. Right after the air flows through the separator and filter in the device, the air contained in it is eliminated The oil and impurities in the higher-strain air can filter the good particles (PM2.5) in the inhaled air to a safety worth of significantly less than 10 micrograms, which satisfies the specifications established by the World CZPT Firm, creating the exhaust gas clear and tasteless. The personnel provide very purified, clean, odorless, protected and reputable compressed respiration air.

Primary parameters

  1. Design:HC-X720Z
  2. Operate force:33Mpa Mpa(330bar)
  3. Displacement (inhalation state):720L/min  L/min
  4. Sort:X-variety structure-4-cylinder 4-phase reciprocating piston compression
  5. Travel: 380V/50Hz/15kw
  6. Lubrication technique:Oil pump lubrication (food grade lubricant 750-H2)
  7. Cooling approach:Air cooling
  8. Handle approach:PLC method computerized shutdown, computerized sewage discharge, temperature control system, section sequence safety function, crisis end purpose, minimal sounds, low temperature, minimal pace, oil filter, contact screen
  9. Clear air:1 air filtration, 3 oil-drinking water separation, 1 air purification
  10. Security gadgets:There are basic safety valves at all stages, automated shutdown perform, and the whole case framework
  11. Packing dimension (length×width×height):98×145×175cm
  12. Excess weight:690kg
  13. Inflation speed:It will take about 3 minutes to fill a 6-liter bottle with 30Mpa
  14. Licensed merchandise:CE certification, MA test report
  15. Packing List:Instruction manual, protection inspection report certificate, 4 sets of inflation hoses and joints

Item composition and qualities
 

one. Strain sensor: exact information, totally free environment of shutdown force

2. Higher-efficiency oil pump lubrication: to ensure equipment procedure

three. Cooling technique: geared up with inter-stage filter system, ultimate stainless metal cooling

four. Filtration method: equipped with air inlet filtration, intermediate filtration and deep air purification system, the compressed gas is safe and thoroughly clean

five. Basic safety promise: box design and style, inter-phase safety valve to ensure the basic safety of the cylinder and personnel

6. Sounds control: developed-in silencer

7. Oil filtering operate: preserve the lubricating oil cleanse, lessen equipment wear and boost services daily life

eight. PLC microcomputer management system

9. Automated shutdown, automatic sewage discharge, running timer

10. With running temperature and stress screen at all ranges

11. Motor overload and overvoltage safety

12. Motor star-delta begin, section sequence security perform

thirteen. Manual unexpected emergency cease switch

14. Visual oil window, intuitively realize the oil placement

Principal application
            Diving bresthing                                                                  Hearth Bresthing

Hearth breathing software: Equipped in the fuel supply stations of the fireplace brigade or different fire-battling cars, it supplies emergency gas provide at the scene of a fireplace or in the rescue and aid approach, so that the greater part of firefighters will be uncovered to a variety of environments this sort of as dense smoke, toxic gas, steam or oxygen deficiency. Respiration substantial-purity, thoroughly clean, odorless, risk-free and reputable compressed air ensures that fireplace extinguishers can safely and securely and properly have out hearth fighting, rescue, disaster aid, and rescue.
Diving respiration application: Diving clubs, diving enthusiasts, marine breeding, marine rescue, shipboard tools, underground functions, fishery fishing, aquaculture, sunken object salvage, underwater engineering, drinking water parks, shipbuilding and other industries, offering divers with large purification, clean and tasteless , Secure and dependable compressed breathing air. In an surroundings that can not meet up with the specifications of the human body for regular respiratory, the air is loaded into a high-strain gasoline cylinder for human respiration.

Item show

                       

If you want us to give you with in depth technological design and style and quotation, you should provide the subsequent complex parameters, and we will reply to your e-mail or telephone in 24 hours.

one.Circulation: _____ Nm3 / hour

2.Pressure: _____Bar(MPa)

3. How many cylinders to fill

four. Whether it wants to be loaded every working day

                         

Model HC-X720Z
Work pressure 33Mpa Mpa(330bar)
Displacement (inhalation state) 720L/min
Type X-type layout-four-cylinder four-stage reciprocating piston compression
 
Drive 380V/50Hz/15kw
Lubrication method Oil pump lubrication (food grade lubricant 750-H2)
Cooling method Air cooling
Control method PLC system automatic shutdown, automatic sewage discharge, temperature control system, phase sequence protection function, emergency stop function, low noise, low temperature, low speed, oil filter, touch screen
 
Clean air 1 air filtration, 3 oil-water separation, 1 air purification
 
Safety devices There are safety valves at all levels, automatic shutdown function, and the whole case structure
 
Packing size (length×width×height) 98×145×175cm
Weight 690kg
Inflation speed It takes about 3 minutes to fill a 6-liter bottle with 30Mpa
 
Packing List Instruction manual, safety inspection report certificate, 4 sets of inflation hoses and joints

 

Model HC-X720Z
Work pressure 33Mpa Mpa(330bar)
Displacement (inhalation state) 720L/min
Type X-type layout-four-cylinder four-stage reciprocating piston compression
 
Drive 380V/50Hz/15kw
Lubrication method Oil pump lubrication (food grade lubricant 750-H2)
Cooling method Air cooling
Control method PLC system automatic shutdown, automatic sewage discharge, temperature control system, phase sequence protection function, emergency stop function, low noise, low temperature, low speed, oil filter, touch screen
 
Clean air 1 air filtration, 3 oil-water separation, 1 air purification
 
Safety devices There are safety valves at all levels, automatic shutdown function, and the whole case structure
 
Packing size (length×width×height) 98×145×175cm
Weight 690kg
Inflation speed It takes about 3 minutes to fill a 6-liter bottle with 30Mpa
 
Packing List Instruction manual, safety inspection report certificate, 4 sets of inflation hoses and joints

 

How to Repair and Maintain an Air Compressor

A compressor is a device used to move air from one place to another. Air enters the air compressor through the intake valve. Inside the compressor, the vanes on the inner rotor rotate within an eccentric cavity. The self-adjusting length arm divides the space into multiple cavities of different sizes. As the rotor rotates, air fills the cavity. As air flows around the cavity, it builds pressure and is squeezed out of the compressor output.

Positive displacement

Positive displacement air compressors use reciprocating pistons to compress air. Gas is drawn in during the suction stroke and compressed by moving the piston in the opposite direction. It then discharges the compressed air by moving it in the opposite direction. This type of air compressor is most commonly found in automobiles, refrigerators, and other applications that require high pressure. However, it is not as efficient as a centrifugal compressor.
Most modern air compressors use positive displacement. Positive displacement models capture a volume of air in the compression chamber and distribute it when the pump is operating at maximum capacity. They are more economical than their negative displacement counterparts. Reciprocating screw air compressors are the most common positive displacement compressors. The reciprocating screw air compressor adopts a water jacket around the cylinder and is often used in processes such as oil drilling.
A bicycle pump is an example of positive displacement compression. Air is drawn into the cylinder and compressed by the moving piston. A piston compressor works on the same principle, but it uses a rotating crankshaft or connecting rod to complete the movement of the pistons. There are two types of positive displacement compressors: single-acting and double-acting. Both types work on the same principle, both are positive displacement compressors. The difference between the two types is the pressure ratio.
In air compression, positive displacement compression reduces the volume of the fluid and reduces its viscosity. This results in higher pressure ratios and is used in centrifugal, axial, and scroll compressors. Positive displacement is a common feature of most air compressors. Positive displacement compressors offer the same benefits and are more energy-efficient when applied to oil-free and gas applications. This type of compression is usually the best choice for low-pressure applications.
air-compressor

oil free

If you’re looking for an air compressor for your business, consider an oil-free air compressor. These models offer cleaner, quieter operation than traditional air compressors and require less maintenance. They also meet ISO Class 0 or Class 1 air purity requirements. Oil-free air compressors are also quieter, with fewer moving parts and less noise. These advantages make oil-free air compressors an ideal solution for many commercial applications.
Air purity is critical in many industries. Even the tiniest drop of oil can damage production equipment or damage products. The best way to find an oil-free air compressor for your business is to consider the process and end product. As air quality improves, more and more businesses are turning to oil-free compressors. Some of the advantages and disadvantages of these air compressors are:
When choosing an oil-free air compressor, it is important to understand the terminology used in the industry. Knowing these terms will make it easier for you to choose the right compressor for your needs. ACTFM, or actual cubic feet per minute, is an industry term for measuring the amount of air pumped in one minute under rated conditions. Although a simple number, it can be very useful in determining which type of air compressor is best for your application.
The ISO 8573-1 international standard defines air quality and provides air purity classifications. The strictest classification is air purity class 0. Many manufacturers claim that oil-free air compressors meet this standard. However, a class 0 oil-free air compressor does not necessarily mean that the air is free of contaminants. In fact, Class 0 is the benchmark for air purity. While zero air quality is the highest level, that doesn’t mean it’s completely oil-free.
air-compressor

double acting

A double-acting air compressor is a device that uses compressed air to generate electricity. Its working principle is based on piston and connecting rod. The connecting rod connects the crankshaft to the piston through pins and caps. The piston moves as the piston moves. Rods are usually made of forged carbon steel. In terms of service and maintenance, double-acting compressors require regular vise maintenance and proper cleaning.
The displacement of the compressor is a measure of the displacement that the piston can produce in a certain period of time. Displacement is usually expressed in actual cubic feet per minute. The exact calculation depends on the type of cylinder and the configuration of the compressor. Single-acting cylinders can have head-end or crank-end displacement, both of which can be measured using the displacement equation. A double-acting air compressor will use this equation. 4 and 6 calculate the displacement.
Double-acting air compressors have multiple cylinders and are made of cast iron. They are water-cooled and have a mechanical connection between the piston and connecting rod. A double-acting compressor compresses air twice per revolution of the motor. One cylinder moves up, while the other cylinder moves down. The piston moves down, allowing air to enter through valve #1. During the operation of the compressor, the temperature of the air and gas increases.
Double-acting air compressors typically have high pressure and are considered workhorses. Double-acting compressors also feature intercooling and double compression. As a result, these machines tend to last longer than single-acting compressors. Its low speed and dual compression make it a workhorse in the compressor industry. Double-acting air compressors are workhorses and versatile devices.
air-compressor

fuel tank pressure switch

You can adjust the pressure in the air compressor tank by adjusting the differential pressure. You can turn the mainspring clockwise or counterclockwise to increase or decrease the pressure. This valve will open when the pressure is low enough to start the compressor. If the pressure is too low, the valve should be closed. The cut-in and cut-out pressures should be set to appropriate values. After adjusting the tank pressure, check the hysteresis of the tank pressure switch and set the desired shutoff pressure.
If the pressure in the tank falls below the cut-in level, the tank pressure switch must be replaced. You can test the switch with a multimeter. Make sure the switch is not damaged. If you can’t find the switch, you can look at the other sections. If you find any damaged or missing parts, you should replace them. Otherwise, it may be time to check the tank pressure switch. You may need to disassemble the compressor and remove the switch.
The fuel tank pressure switch is an important part of the air compressor. It keeps you informed of the amount of air delivered by the compressor. If your tank or tank is damaged, your readings will be wrong. If the pressure switch is damaged, it will not function properly and result in incorrect readings. Fortunately, there are some easy ways to fix this. To prevent this from happening, keep the tank pressure switch in good condition.
When the air pressure in the tank drops to the cut-in pressure setting, the switch allows power to flow through it. This will start the motor and pump of the air compressor. Then, if the pressure in the tank rises above the cut-off level, the switch will trip and stop the compressor. This will prevent it from being over-pressurized. Power flow will continue to flow to the motor. Depending on your compressor model, you can change the cut-in and cut-out pressures as needed.

energy source

The power supply of the air compressor is very important. Most air compressors run on 12 VDC, which is ideal for automotive use. Alternatively, you can buy a switching power supply for around $20. No matter which power supply you choose, you must ensure that it can support the maximum current of the compressor. You can find power supplies in all sizes, from quarter-horsepower to five-horsepower.
The voltage required for a three-phase air compressor will vary. Three-phase air compressors require three separate power cords and a three-phase electrical service panel. This is because a standard 120/240-volt electrical service panel is not sufficient to power a three-phase compressor. Additionally, three-phase compressors require three separate isolated wires for the engine and motor circuits. Three-phase compressors do not require a neutral wire.